New Pond Pumps

Archive for the ‘Types’ Category

Before you begin building your waterfall pond, you need to decide what type of waterfall you wish to have with your pond.

Do you want it to be a soothing and peaceful waterfall, or do you want to have the high flow, roaring waterfall? The ideology behind choosing the pumps is relatively the same; however, you will obviously require a larger pump for a larger waterfall.

Location of your pond is also another factor when choosing a waterfall pump. If you are going to need to turn off the waterfall pump, then you need to consider having another, smaller pump, running continuously to keep the biological filter running effectively.

Another consideration when deciding what type of waterfall you want to have with your pond is the cost of electricity to run the pump. A large pump will consume a great deal of electricity, driving up the cost of your energy bills significantly. The initial cost of a pond pump is the least of your worries—it is the long term running of the pump that will be a concern.

In order to choose the correct pump for your waterfall, you need two vital pieces of information—the vertical height of the waterfall inlet above the surface of your pond and the width of the water overflow point for the waterfall.

Ensure that you have some professional help when choosing a waterfall pond pump. Having a pump that is too small will not only be disappointing but can affect the health of your entire pond. It is imperative that your pond pump be of an adequate size for your pond—to help the filters work properly and keep toxins in your pond to a minimum. If your pond pump is too large, you can burn it out by not having enough water to run through it. Thusly, you will also be consuming more energy than is necessary to have a healthy pond and run your waterfall, which in turn can be a very costly endeavor.

Pond pumps can help you conserve water and control the temperature in your greenhouse.

A simple pump can reduce the temperature in the summer and can help you warm the greenhouse in the winter. In addition, using a pond pump to circulate water in your greenhouse may contribute to the health of your plants and save you time in the process.

There are several ways that pumps are being used to save water and to make the greenhouse environment more productive. One way that a pond pump circulation can be used is by heating the root zone of your plants. In order to accomplish this you’ll need a water heater, a pond pump, pipes, and controls to operate your system. In addition, you would need clamps and fittings. It’s recommended that you select plastic pipes that can withstand 100 PSI of water pressure. The piping is buried a few inches under the soil, and the circulating water nourishes the plant and warms the soil. If your goal is to drop the temperature in the greenhouse you may want to start laying tubing to the farthest side of the greenhouse and coil the tubing through the beds. The longer the water circulates in the greenhouse the more profound the cooling effect.

Another way that inventive growers have used pond pumps to heat the air in the green house is to use the pond pump to circulate water to pass through manure. The manure breaks down with watering as generates heat. The resulting heat warms the air inside the space of the greenhouse. This process can be messy and time consuming, but many gardeners are improving the process.

Another interesting way to use a pond pump to circulate greenhouse water is to simply use it to irrigate to water the plants in the greenhouse. This process is fairly simple but does require some consideration. For example, where is the water source and what size pond pump to use. In a dry climate this procedure can be used to reduce water consumption providing that you have a source that allows the water to be recycled in an effective way. For example f you have a pond on the property, water could be diverted to the greenhouse. If you don’t then you’ll have to have some sort of reservoir you may use large aquariums on either or both sides of the greenhouse. Some greenhouse growers have put ponds inside their greenhouses and have stocked them with fish!

If you are diverting water from an existing pond on the property a pond pump with 250 GPH, will probably provide enough power to circulate the water into the greenhouse, if for example, you have capacity in the pond of around 200 gallons. You can determine capacity by measuring length, width and depth of the pond. Another way to encourage the free flow of water throughout the greenhouse is to use gravity if possible. Further you can save on water by piggybacking timers along the system. By controlling the frequency of watering you can conserve water even more. Other greenhouse growers use rain catcher as a partial source of water for their reservoirs. Water catchers are great in environments with moderate annual rainfall, but may be of little use in a desert region.

Pond pumps can be used in numerous ways to circulate water in your greenhouse.

All you need to have to get started is the willingness to explore the possibilities and benefits of implementing this kind of system. Gardeners around the country are experimenting with pond pumps to create systems ideally suited to the growing conditions and climate in their regions. For the creative greenhouse grower, the possibilities are endless. Using simple pond pumps can increases the efficiency of water usage and in addition reduces costs associated with climate control inside their greenhouses.

It is a tradition within the Japanese culture that has taken America by storm and now you too can have a Koi pond.

Many Japanese celebrate a number of things, such as the births of children in their households, with Koi. Now you too can spend hours of enjoyment with your own Koi pond and enjoy it with the quiet of a submerged pond pump.

Koi are a common carp. The scientific name for them is Cyprinus carpio. Carp fish are very old with bones having been discovered in South China dating back about 20 million years. Koi are bred in almost every place in the world now and are considered the most popular fresh-water ornamental pond fish by many. There are as many varieties of
Koi as there are colors in the spectrum now with cross breeding. Koi ponds have now become a very popular part of landscaping. One of the larger issues with Koi, however, is that they don’t like noise. If your pond environment is noisy your Koi will hide thus making it difficult to enjoy the wonderful colors they add to your yard.
Koi live for long periods of time if properly cared for and this includes the proper pump system. Submerged pumps run quieter then above ground pumps and because of this your pond is more peaceful for these long living fish.

When you embark on building your Koi pond it is important to do some basic research on Koi and what it takes to care for them. When you do this, things such as their need for a quiet environment and their need for a certain amount of sunlight will be clear before you build the pond. Although they look very low maintenance, they do require more care than your average goldfish. For instance, Koi can get to be a meter long with the average closer to 80 centimeters. They need room to grow and live so your Koi pond needs to be large enough to house the number of fish you want to keep. Your pump also needs to be of a large enough capacity to provide enough oxygen for the number of Koi you have. Koi are a social fish so you can count on at least having three to start with.

Koi also produce ammonia when they eat thus releasing it into the water. It is because of this that it is very important to keep your Koi pond clean whether it is with a good pump or by gentle hand cleaning. If too much ammonia sits in the water your Koi will die, so maintenance is an important consideration when building your Koi pond.
Building your Koi pond can be a family project and watching them grow over the years can create some lasting memories.

Many people are taking their gold fish bowl a step further by creating backyard goldfish ponds!

But in order for the goldfish to survive in a backyard pond, some sort of pond pump will be necessary. The following paragraphs will discuss backyard goldfish ponds, and which pond pumps work the best in them.

For a small backyard goldfish pond, a small fountain pump can be sufficient. But keep in mind, a small fountain pump will only provide enough oxygen for a few fish to remain healthy. If you plan to use a small fountain pump in your backyard goldfish pond, keep in mind not to over populate your pond with fish! Keep the few fish in your backyard goldfish pond fed, and they should remain healthy with a small fountain pump.

When choosing a pond pump for your backyard goldfish pond, there are a few things to remember. First of all, read the box the pump comes in. The pump you choose should state right on the box that it is a pump for a “fish” pond. This will help ensure the pond pump you choose is suitable to meet your needs, as well as the needs of your fish. If the box does not state it is intended for a “fish” pond, you should probably chose a different pump for your backyard goldfish pond.

A guarantee is always important when you are trying to decide which pond pump is best for your backyard goldfish pond. Should something malfunction in your pond pump, your fish cannot wait weeks for a repair man to come out and assess and fix the problem. It is important that your pump run all the time, without interruption. It is always best if you can find a guarantee that will replace the pump itself, just as soon as it malfunctions.

Deciding on the perfect pond pump for your backyard goldfish pond should not be too difficult. Keeping the above facts in mind, and do a little research and the choice should be simple.